Many people that research cell signal boosters look at the YX500-CEL and YX500-PCS units as a solution for their weak cell signal. What they don’t realize is that these units work specifically for one frequency used by the telecom companies.

The zBoost YX500-CEL boosts the cellular signal on the 800MHz frequency. AT&T and Verizon Wireless utilize this frequency. The zBoost Wi-Ex YX500-PCS boosts signal on the 1900MHz frequency. Sprint and T-Mobile use these frequencies for voice and data.

When you need to boost both frequencies, zBoost Wi-Ex YX510 works on both the 800MHz and 1900MHz. It’s a great booster that covers up to 2500 square feet. It comes with an outdoor antenna that’s simple to mount. Put in the location where you get the best cell coverage, either outside on your roof or in the attic where there’s a signal to boost.  Lay out the accompanying cable to the amplifier located in the area where you want the most increased signal,

It works best when you’re trying to boost 3-4 bars from outside and bring the signal inside to where you initially didn’t have any bars. The zBoost Wi-Ex YX510 provides an instant signal boost when you set up the antenna and connect the amplifier correctly. You must mount the antenna away from metal. Metal interferes with the antenna signal from the cellular tower.

If you need more from you zBoost Wi-Ex YX-510, there are upgradeable antennas available that do a better job of bringing in the signal from the cell phone tower. The YX039 is designed specifically for the YX-510 because it’s a dual band outdoor antenna.

Check WirelessAdvisor.com to see which frequency is used by which carrier. If it says 800MHz and 1900MHz, you need the dual band zBoost Wi-Ex YX510 signal booster because your carrier works on both bands.